Driveways and stairs

A Comfort Heat ice and snow melting system is the solution to winter frost and snow problems that provides clean entrances to shopping malls and safe walking areas for pedestrians. The thermostat with advanced moisture sensors ensures that the maximum results are achieved with minimum amount of energy consumption.
A very thin (3,6-4,8 mm) twin conductor heating cables are easily installed in each step of outdoor stairs. The recommended output is 250W/sq.m. This heating cable is laid with a 7 cm distance between cable loops in the steps and landing area, with 4 cable runs to each step.

Automatic Comfort Heat ice and snow melting system keeps driveways and car parking areas clean during winter. Comfort Heat heating mats with output – 280/300W/sq.m. are recommended to installed in outdoor areas such as bridges, pavements, driveways are always more susceptible to the cold weather. Heating system is highly efficient against ice and snow appearance in car parking and bridges, also it solves the problem with snow shuffling and elimination. Comfort Heat ice and snow melting system reduces the risk of accidents and ensures safe environment.


CTACV -30 | heating cable

CTACV-30 is suitable for roof ice and snow melting systems (roof gutters and downpipes) and frost protection of ground (ramps, driveways, entrances to car parking, car parkings, pavements, bridges, stairs, etc.), or unfreezing a frozen soil in winter (construction sites).

CTACV-20 | twin conductor heating cable

CTACV-20 is designed for roof ice and snow melting systems and/ or the soil frost prevention, and frozen soil in winter (construction sites).

CFSAV-300 | outdoor heating mat

CFSAV-300 is suitable for ice protection of stairs, pavements, driveways, entrances to car parking, car parkings, bridges, landing ramps, etc.) or unfreezing of frozen ground in winter (construction sites).

CTAV-18 | heating cable

CTAV-18 is installed in a thin or thick floor constructions, or in renovated old floor (as the main, additional or accumulation heating) and for large windows or cold zones.

ETR2-1550 | electronic thermostat for snow melting system control

ETR2-1550 is used for: frost protection control of roof gutters and downpipes; ice and snow protection control of steps, entrances, driveways, parking lots, ramps, pathways and bridges for small ground areas.

ETO2-4550 | microprocessor based thermostat for snow melting system control

ETO 2-4550 thermostat is used for: frost protection control of roof gutters and downpipes; frost protection control of steps, entrances, driveways, parking lots, ramps, sideways and bridges.

CTAV-10 | twin conductor heating cable

CTAV-10 heating cable is used for installation of wooden floor heating and frost protection of water, sewerage and technological pipes in unheated premises and floor protection of cold stores.

CTAV-18 | twin conductor heating cable

CTAV-18 is installed in a thin or thick floor constructions, or in renovated old floor (as the main, additional or accumulation heating) and for large windows or cold zones.

CFTAV-300 | outdoor heating mat

CFTAV-300 is suitable for ice protection of stairs, pavements, driveways, entrances to car parking, car parkings, bridges, landing ramps, etc.) or unfreezing of frozen ground in winter (construction sites).