Frost protection

Comfort Heat pipe heating system ensures the frost protection of pipes and keeps them running efficiently by the different temperatures and weather conditions.

Comfort Heat pipe heating system can be used for these main purposes:
• The frost protection of pipes
• The maintenance of required temperature in technological pipes

Comfort Heat pipe heating system can be installed on/in any pipe system where there is a requirement to prevent water and sanitary pipes from becoming frozen or being damaged by ice. The heating system ensures unfrozen pipes, steady transportation of liquids and the maintenance of required temperature in pipes which transport hot water or other high viscosity fluids.

Comfort Heat pipe heating system can be installed directly on the pipes or inside them. It can be also used for pipes heating in indoor/outdoor or when the pipes are above/under the ground. Pipe tracing Heat system consists of self-regulating heating cables, thermostats and installation accessories. Comfort Heat thermostats and sensors ensure the optimal result by minimum energy consumptions.


ETI-1221 | termostat (+10 °C…+110 °C)

ETI-1221is designed for pipe tracing of high temperature industrial lines temperature and other heating systems control.

CTACV -30 | heating cable

CTACV-30 is suitable for roof ice and snow melting systems (roof gutters and downpipes) and frost protection of ground (ramps, driveways, entrances to car parking, car parkings, pavements, bridges, stairs, etc.), or unfreezing a frozen soil in winter (construction sites).

CTACV-20 | twin conductor heating cable

CTACV-20 is designed for roof ice and snow melting systems and/ or the soil frost prevention, and frozen soil in winter (construction sites).

CFSAV-300 | outdoor heating mat

CFSAV-300 is suitable for ice protection of stairs, pavements, driveways, entrances to car parking, car parkings, bridges, landing ramps, etc.) or unfreezing of frozen ground in winter (construction sites).

CTAV-10 | heating cable

CTAV-10 heating cable is used for installation of wooden floor heating and frost protection of water, sewerage and technological pipes in unheated premises and floor protection of cold stores.

Repair kit for heating cables and mats

Repair kit for heating cables and mats is used to repair heating cables.

Junction seal SF-P/ SF-T

Junction seal SF-P/ SF-T is used for heating cable installation in ice and snow melting systems.

Self-limiting cable junction seal

Self-limiting cable junction seal is used for heating cable installation in ice and snow melting systems.

Installation tape

Installation tape is used for heating cable installation.

ETN4-1999 | electronic thermostat with LCD screen (–19 °C…+70 °C)

ETN-1999 thermostat is designed to control temperature of room heating systems, pipe tracing, roof gutters and downpipes frost protection, soil frost protection and cold store floor frost protection.

ETV-1991 | thermostat (0 °C…+40 °C)

ETV-1991 thermostat is designed for heating system control, industrial pipe line tracing and pipe frost protection. The function of temperature setback (–5 °C) is activated with the help of additional relay.

Pipeheat-10 | self-limiting heating cable with plug

PipeHeat -10 is installed directly on the pipe fixing the cable on the pipe with adhesive aluminium tape or inserted into the pipe through the metal fitting if there is no possibility to fix it on the pipe.

CTACV -30 | twin conductor heating cable

CTACV-30 is suitable for roof ice and snow melting systems (roof gutters and downpipes) and frost protection of ground (ramps, driveways, entrances to car parking, car parkings, pavements, bridges, stairs, etc.), or unfreezing a frozen soil in winter (construction sites).

CTAV-10 | twin conductor heating cable

CTAV-10 heating cable is used for installation of wooden floor heating and frost protection of water, sewerage and technological pipes in unheated premises and floor protection of cold stores.