Pipe tracing

During the winter problems with frost in water supply pipes and sewage systems can be avoided by heating the pipe internally or externally. Self-regulating cables 11FSM2-CT (output – 11W/m) and 17FSLe2-CT (output – 17W/m) are installed where is a need to prevent water and sanitary pipes from freezing and being damaged by ice. Self-regulating cables FSM and FSLe can be cut to the required length and are easily installed.

PipeHeat-10 self-regulating cable is recommended for internal installation in the pipes. It is pre-fabricated with a 1,5m length cold tail cable with a plug. Self-regulating cables will keep your pipe and sewage systems protected from frost in winter.


ETI-1221 | termostat (+10 °C…+110 °C)

ETI-1221is designed for pipe tracing of high temperature industrial lines temperature and other heating systems control.

CT-FL | Capillary Thermostats (Ex) (0 ºC…+40 ºC, 20 ºC…+300 ºC)

The thermostats CT-FL/2C/A and CT-FL/2C/C are capillary thermostats comprising of a liquid filled sensing bulb connected to an electrical switch via a capillary tube.

FSLe-CT/CF self-limiting heating cable (Ex) up to +85 °C

FSLe-CT is used for heating, temperature maintenance and frost protection of pipes. FSLe-CF cable can be installed in chemically hazardous zones, such as production of bitumen, oil products, food and industrial oils and other chemical materials, approved for use in both safe and hazardous areas.

FSM-CT/CF self-limiting heating cable (Ex) up to +85 °C

FSM-CT is installed in residential, public and commercial buildings and in industrial hazardous (Ex) zones. FSM-CF is installed in chemically hazardous zones, such as production of bitumen, oil products, food and industrial oils and other chemical materials, approved for use in both safe and hazardous areas.

CTAV-18 | heating cable

CTAV-18 is installed in a thin or thick floor constructions, or in renovated old floor (as the main, additional or accumulation heating) and for large windows or cold zones.

Metal fitting M20/25

Metal fitting M20/25 is used for heating cable installation in waterpipes.

Self-limiting cable junction seal

Self-limiting cable junction seal is used for heating cable installation in ice and snow melting systems.

Aluminium tape

Aluminium tape is used for heating cable installation on water pipes.

ETN4-1999 | electronic thermostat with LCD screen (–19 °C…+70 °C)

ETN-1999 thermostat is designed to control temperature of room heating systems, pipe tracing, roof gutters and downpipes frost protection, soil frost protection and cold store floor frost protection.

ETV-1991 | thermostat (0 °C…+40 °C)

ETV-1991 thermostat is designed for heating system control, industrial pipe line tracing and pipe frost protection. The function of temperature setback (–5 °C) is activated with the help of additional relay.

Pipeheat-10 | self-limiting heating cable with plug

PipeHeat -10 is installed directly on the pipe fixing the cable on the pipe with adhesive aluminium tape or inserted into the pipe through the metal fitting if there is no possibility to fix it on the pipe.